Introducing the U-POL S2003 Plastic Primer Adhesion Promoter
Enhance the adhesion of paints, adhesives, and sealants to difficult-to-coat plastics with the U-POL S2003 Plastic Primer Adhesion Promoter. This professional-grade, fast-drying primer is ideal for use on various plastics, including Thermoplastic Olefins (TPO), ensuring exceptional surface preparation for optimal paint application.
Key Features:
- High Compatibility: Perfect for a wide range of plastics, especially TPO.
- Fast Drying: Minimizes waiting time, speeding up project completion.
- User-Friendly Application: Easy to apply with standard equipment.
- Clear Finish: Delivers a clear amber liquid finish that integrates smoothly with subsequent coatings.
Technical Specifications:
- Appearance: Clear amber liquid
- Specific Gravity: 0.87
- Storage Temperature: +5°C to +25°C
- Packaging: 1L tins (Order Code: S2003/1)
Step-by-Step Instructions:
Surface Preparation:
- Clean: Use a plastic cleaner like U-POL PlastX 1 to thoroughly clean the plastic surface and remove any contaminants.
- Abrade: Use P240 to P320 grit abrasive paper to ensure proper adhesion.
Primer Application:
- Shake: Mix the contents by shaking the can thoroughly.
- Setup: Use it as an aerosol or, in the case of 1-liter packaging, use a HVLP gravity gun with a 1.0 to 1.2mm fluid tip.
- Apply: Apply 1-2 light, even coats of the primer to the prepared surface.
- Flash Off: Allow 5-10 minutes of flash-off time between coats for partial drying.
Drying Time:
- Dry for 20 minutes at 20ºC or 10 minutes at 60ºC before proceeding.
Overcoating:
- Apply a suitable primer filler or surfacer within one hour of applying the primer.
- Follow the manufacturer’s instructions for best results.
Safety and Handling:
- Always wear the recommended personal protective equipment (PPE).
- Refer to the safety data sheet for detailed handling instructions.
- Store the product in a cool, dry place within the recommended temperature range.