U-POL Universal Spot Primer – Fast-Drying Primer for Local Repairs

The U-POL Universal Spot Primer is the perfect solution for small rub-throughs, sanding-through areas, and quick localised repairs in the spray booth or body shop. This professional-grade 1K primer adheres directly to bare metal and plastic – no adhesion promoter or special pre-treatment required.

Why choose this spot primer?

• Fast drying: Ready for overcoating in just minutes – ideal for high-efficiency workflows.
• Multi-surface adhesion: Bonds to metal, plastic, existing paint, and body filler.
• Ready to use: No mixing, no fuss – apply straight from the can.
• Perfect for spot repairs: Minimal material use, maximum speed and precision.
• Professional finish: Creates a smooth, even surface ready for seamless topcoat blending.

Application instructions

1. Sand and clean the repair area thoroughly.
2. Degrease using an appropriate cleaner (e.g. U-POL System 20 Degreaser).
3. Apply spot primer in light, even coats. Allow to dry between coats if layering.
4. If necessary, sand lightly with P800–P1000 before topcoating.
5. Overpaint using waterborne or solvent-based topcoats.

Technical details

• Type: 1K fast-drying spot primer
• Colour: Grey
• Dry time: 5–10 minutes at 20°C
• Overcoatable with: Waterborne and solvent-based topcoats
• Packaging: Aerosol or tin (depending on variant)

Pro tip

For best results: apply in thin layers from approximately 20 cm distance. Avoid runs and ensure fast, even drying.

For professional use only. Always wear appropriate PPE (gloves, respiratory protection) and ensure proper ventilation during application.